LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Metro LSi, 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Controls - Remove/Install/Overhaul - 1.0L) >> Ignition System >> Distributor >> Installing Distributor When Position Has Been Lost

Installing Distributor When Position Has Been Lost

WARNING: This page is about a different variant/trim than selected.
  1. Remove FI fuse from fuse and relay box. Rotate crankshaft until No. 1 piston is at TDC of compression stroke. Align timing mark on crankshaft pulley to zero position on timing cover.
  2. Position rotor to number one cylinder position. Install distributor. Reinstall FI fuse. Ensure timing is correct. See IGNITION TIMING in ADJUSTMENTS - 1.0L article.
scientia non olet · About LEMON Manuals