LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Forward Control P30, 7.4 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Engine Controls - Removal & Installation) >> Air Induction Systems >> Air Cleaner Assembly >> Installation

Air Cleaner Assembly: Installation

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the air cleaner assembly into position. Install the air cleaner attachment bolt. Tighten the air cleaner-to-support bracket bolt to specification. See TORQUE SPECIFICATIONS  .
  2. Position the outlet resonator/duct assembly. Connect the PCV fresh air vent hose assembly. Tighten the clamp at throttle body assembly.
  3. Position outlet resonator/duct assembly up with support bracket and install push-pin. Tighten the clamp at the air cleaner assembly. Connect the IAT sensor connector.


  1. Install the air cleaner assembly into position, aligning locking pins into the front panel. Install the air cleaner attachment bolt. Tighten the air cleaner-to-support bracket to specification. See TORQUE SPECIFICATIONS  .
  2. Connect the MAF sensor electrical connector. Install the MAF sensor electrical harness into the retaining clip. Tighten the clamp at the air cleaner assembly to specification.
scientia non olet · About LEMON Manuals