LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Corvette 2D Convertible, Automatic >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System With Traction Control System >> Diagnosis & Testing >> Scan Tool Special Functions >> TCS Test

TCS Test

  1. This test runs the pump motor and TCS valves for about 25 seconds in order to apply fluid to rear wheel circuit. To perform test, go to next step.
  2. Turn ignition off. Install scan tool. Turn ignition to RUN position. Raise and support vehicle until wheels are about 6 inches from floor. Using scan tool's Special Functions, select TCS TESTS.
  3. Command TCS system test ON. Pump motor should turn on for about 25 seconds. Attempt to turn rear wheel by hand. Wheel should not turn, due to pressure from pump motor.
scientia non olet · About LEMON Manuals