LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Astro Van Passenger, RWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System - Remote >> Programming Procedure >> Transmitter Programming

Transmitter Programming

  1. Using a jumper wire, ground terminal No. 4 (Black wire) to terminal No. 8 (Black/White wire) of Data Link Connector (DLC) located under lower left side of instrument panel. Receiver will respond by locking and unlocking all doors within 2 seconds. Press and hold LOCK and UNLOCK buttons simultaneously on first transmitter to be programmed, until all locks cycle.
  2. Press and hold LOCK and UNLOCK buttons simultaneously on second transmitter to be programmed (if equipped). Receiver will respond by locking and unlocking all doors within 2 seconds. Remove jumper from DLC terminals No. 4 and 8. Transmitter operation can be verified by locking and unlocking doors and automatically activating liftgate window release.
scientia non olet · About LEMON Manuals