LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Astro Van Passenger, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System >> System Tests >> Side Door Lock Delay Does Not Operate

Side Door Lock Delay Does Not Operate

  1. Disconnect door lock control module harness connector. Connect test light between ground and door lock control module Orange wire terminal. See WIRING DIAGRAMS  . If test light illuminates, go to next step. If test light does not illuminate, repair open in Orange wire.
  2. Connect test light between door lock control module harness connector Black and Orange wire terminals. If test light illuminates, go to next step. If test light does not illuminate, repair open in Black wire.
  3. Connect test light between ground and door lock control module harness connector Light Blue wire terminal. Place door lock switch in LOCK position. If test light illuminates, go to next step. If test light does not illuminate repair open in Light Blue wire.
  4. Connect test light between ground and door lock control module harness connector White wire terminal. Place door lock switch in UNLOCK position. If test light illuminates, go to next step. If test light does not illuminate, repair open in White wire.
  5. Close side door. Connect self-powered test light between ground and door lock control module harness connector Orange/Black wire terminal. If test light does not illuminate, go to next step. If test light illuminates, go to step 8).
  6. Open side door. Connect self-powered test light between ground and door lock control module harness connector Orange/Black wire terminal. If test light does not illuminate, go to next step. If test light illuminates, replace door lock control module.
  7. Disconnect side door jamb switch. Connect a fused jumper wire between ground and side door jamb switch harness connector Orange/Black wire terminals. Connect self-powered test light between ground and door lock control module harness connector Orange/Black wire terminal. If test light illuminates, replace door jamb switch. If test light does not illuminate, repair open in Orange/Black wire.
  8. Disconnect side door jamb switch. Connect self-powered test light between ground and door lock control module harness connector Orange/Black wire terminal. If test light illuminates, check Orange/Black wire between door lock control module and door jamb switch for short to ground. Repair as necessary. If wire is okay, replace door lock control module. If test light does not illuminate, replace side door jamb switch.
scientia non olet · About LEMON Manuals