Cruise Control Release Switch
NOTE:
Cruise control release switch and stoplight switch should be adjusted together. Incorrect adjustment of either of these switches could cause premature brake lining wear or cruise control system to work improperly.
- Remove left instrument panel insulator. Press brake pedal fully down.
- Push switches into retainers until switches are fully seated. Pull brake pedal rearward against pedal stop until audible clicking can no longer be heard. See Fig 1 .
- Measuring pedal travel from centerline of brake pedal, ensure switch contacts are open at 1/8-1/2" (3.5-12.5 mm) of pedal travel. Nominal actuation of stoplight switch contacts is about 3/16" (4.5 mm) after release switch contacts open. Check brakelights for proper operation.