Left Mirror Does Not Operate In Up/Down Or Left/Right Mode
- Ensure power mirror switch 8-pin connector C1 is connected. Disconnect power mirror switch 4-pin connector C2. Connect test light between connector C2 (switch-side) terminals "A" (Light Green wire) and "C" (Yellow wire). With left mirror selected, move power mirror switch to up, then down positions. If test light illuminates in both positions, go to next step. If test light does not illuminate in both positions, replace power mirror switch.
- Connect test light between connector C2 (switch-side) terminals "A" (Light Green wire) and "B" (White wire). Move power mirror switch to right, then left positions. If test light illuminates in both positions, replace left power mirror drive unit. If test light does not illuminate in both positions, replace power mirror switch.