Right Mirror Does Not Operate In Up/Down Or Left/Right Mode
- Disconnect right power mirror connector. Connect test light between power mirror harness connector terminal "A" (Light Blue/White wire) and ground. With right mirror selected, move power mirror switch to down position. If test light illuminates, go to next step. If test light does not illuminate, check for open in Light Blue/White wire between power mirror switch and right power mirror. If circuit is okay, replace power mirror switch.
- Connect test light between right power mirror harness connector terminals "A" (Light Blue/White wire) and "C" (Brown/White wire). Move power mirror switch to up, then down positions. If test light illuminates in both positions, go to next step. If test light does not illuminate in both positions, check for open in Brown/White wire between power mirror switch and right power mirror. If circuit is okay, replace power mirror switch.
- Connect test light between right power mirror connector terminals "A" (Light Blue/White wire) and "B" (Red/White wire). Move power mirror switch to left, then right positions. If test light illuminates in both positions, replace right power mirror drive unit. If test light does not illuminate in both positions, check for open in Red/White wire between power mirror switch and right power mirror. If circuit is okay, replace power mirror switch.