Removal & Installation
- Vehicle Speed Sensor (VSS) is located in left rear of transmission (2WD) or transfer case (4WD). Ensure ignition is off. Raise and support vehicle. Disconnect VSS electrical connector. Place a container under VSS mounting area to catch transmission fluid when VSS is removed.
- Remove VSS mounting bolt. Remove VSS and "O" ring using J-38417. To install, coat NEW "O" ring with transmission fluid. Install "O" ring onto VSS. Install VSS and "O" ring into transmission using J-38417. Tighten mounting nuts or bolts to specification. See TORQUE SPECIFICATIONS table.