Side Door Lock Delay Does Not Operate
- Connect test light between door lock control module Orange wire and ground. If test light illuminates, go to next step. If test light does not illuminate, repair open in Orange wire.
- Connect test light between door lock control module Black and Orange wires. If test light illuminates, go to next step. If test light does not illuminate, repair open in Black wire.
- Connect test light between door lock control module Light Blue wire and ground. Place door lock switch in LOCK position. If test light illuminates, go to next step. If test light does not illuminate repair open in Light Blue wire.
- Connect test light between door lock control module White wire and ground. Place door lock switch in UNLOCK position. If test light illuminates, go to next step. If test light does not illuminate, repair open in White wire.
- Close side door. Connect self-powered test light between door lock control module Orange/Black wire and ground. If test light does not illuminate, go to next step. If test light illuminates, go to step 8).
- Open side door. Connect self-powered test light between door lock control module Orange/Black wire and ground. If test light does not illuminate, go to next step. If test light illuminates, replace door lock control module.
- Disconnect side door jamb switch. Connect a fused jumper wire between ground and side door jamb switch connector Orange/Black wire. Connect self-powered test light between door lock control module Orange/Black wire and ground. If test light illuminates, replace door jamb switch. If test light does not illuminate, repair open in Orange/Black wire.
- Disconnect side door jamb switch. Connect self-powered test light between door lock control module Orange/Black wire and ground. If test light illuminates, check Orange/Black wire between door lock control module and door jamb switch for short to ground. Repair as necessary. If wire is okay, replace door lock control module. If test light does not illuminate, replace side door jamb switch.