LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1996 >> Monte Carlo LS >> Repair and Diagnosis >> Suspension >> Wheel Alignment Specifications & Adjustment Procedures >> Wheel Alignment Procedures >> Camber Adjustment (Rear)

Camber Adjustment (Rear)

  1. Raise and support vehicle. Remove rear wheel. On Cutlass Supreme and Regal, remove auxiliary spring. On all models, remove strut. Put strut in a vise. File the following bolt hole at lower end of strut to make it oblong. See Fig 1 .
    • Lower bolt hole (Cutlass Supreme, Grand Prix and Regal)
    • Upper bolt hole (Lumina and Monte Carlo)
  2. Install strut, but DO NOT fully tighten strut mounting bolts at steering knuckle. Lower vehicle. Adjust camber to specification. See WHEEL ALIGNMENT SPECIFICATIONS  . Tighten bolts to specification. See TORQUE SPECIFICATIONS  .
Fig 1: Elongating Bolt Hole For Camber Adjustment (Rear)
G95G14627Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals