Disc Brake Specifications

WARNING: This page is about a different car, the 1996 Pontiac Grand Prix, 1996 Oldsmobile Cutlass Supreme, and 1996 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

DISC BRAKE SPECIFICATIONS

Application

In. (mm)

Disc Diameter

Front

11.200 (284.50)

Rear

10.945 (278.00)

Discard Thickness ⁽¹⁾

Front

.956 (24.30)

Rear

.370 (9.40)

Lateral Runout

.003 (.08)

Maximum Scoring ⁽²⁾

.060 (1.52)

Minimum Refinish Thickness

Front

.972 (24.69)

Rear

.385 (9.78)

Original Thickness

Front

1.039 (26.39)

Rear

.433 (11.00)

Parallelism

.0005 (.013)

⁽¹⁾	Use specification stamped on rotor (if available).

⁽²⁾	Manufacturer does not recommend resurfacing rotors when replacing brake pads. Resurface rotors only when there is a brake pulsation complaint or scoring greater than .060" (1.5 mm).