LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1996 >> Forward Control 6.5 F, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - P Series (Gasoline) >> Fuel System >> Throttle Body (CSI) >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Remove air inlet duct fastener and duct. Disconnect IAC valve and TP sensor electrical connectors. Disconnect throttle and cruise control cables.
  2. Remove accelerator cable bracket bolts and bracket. Remove wiring harness fastener nut and throttle body retaining studs. Remove throttle body assembly. Remove flange gasket and discard.
  3. Clean gasket surface on intake manifold and throttle body. Install NEW flange gasket. Install throttle body. Install throttle body studs and wiring harness. Tighten throttle body studs to 18 ft. lbs (25 N.m). To complete installation, reverse removal procedure. Ensure throttle and cruise control linkage does not hold throttle open.
scientia non olet · About LEMON Manuals