LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1996 >> Corvette Base, 2D Convertible, 5.7 P >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System - Remote >> Diagnostic Charts >> Transmitter Cannot Be Programmed (2 Of 2) >> Circuit Description

Circuit Description

When a program request has been selected with DIC switches and is recognized by CCM, the CCM's program request output grounds the PKE program request input for about 100 milliseconds before allowing the program request input to return to a normal 5-volt level. This signal is read by the PKE program request input which supplies the 5-volt pull-up for the circuit. See TRANSMITTER PROGRAMMING  for programming procedures and information.

NOTE: Test numbers refer to numbers on diagnostic chart.
scientia non olet · About LEMON Manuals