LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1996 >> Chevy Van G2500, Van Cargo Extended, 5.0 M >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System >> Testing >> Power Door Lock Control Module Attempts To Lock Side Door Even Though Side Door Is Open

Power Door Lock Control Module Attempts To Lock Side Door Even Though Side Door Is Open

  1. Disconnect power door lock control module connector. Connect self-powered test light between power door lock control module connector terminal "F" (White/Black wire) and ground. Open side door. If test light does not come on, go to next step. If test light comes on, replace power door lock control module.
  2. Disconnect side door jamb switch connector. Connect self-powered test light between side door jamb switch connector terminal "B" (Black wire) and ground. If test light comes on, go to next step. If test light does not come on, repair open circuit in Black wire.
  3. Connect fused jumper wire between voltage and power door lock control module connector terminal "F" (White/Black wire). Connect test light between side door jamb switch connector terminal "A" (White/Black wire) and ground. If test light comes on, replace side door jamb switch. If test light does not come on, repair open circuit in White/Black wire.
scientia non olet · About LEMON Manuals