LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1996 >> C3500 HD 6.5 F, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 6.5L Diesel >> Diagnostic Trouble Codes >> DTC P0602 - Pcm Not Programmed >> Diagnostic Procedures

Diagnostic Procedures

  1. Perform Powertrain On-Board Diagnostic (OBD) System Check. After performing OBD system check, go to next step.
  2. Check all PCM connections. If a problem was found, go to step 4). If a problem was not found, go to next step.
  3. Check with manufacturer for latest software. If a problem was found, go to next step. If a problem was not found, go to step 5).
  4. Try to reprogram again. If programming is complete, go to step 6). If programming is not complete, go to next step.
  5. Replace PCM. Go to next step.
  6. Using scan tool, select DTC, CLEAR INFO. Start and warm engine to normal operating temperature. Select DTC, SPECIFIC, then enter DTC P0602. Operate vehicle within the conditions for setting this DTC. If scan tool indicates that this test ran and passed, go to next step. If scan tool does not indicate that this test ran and passed, repeat step 2).
  7. Using scan tool, select CAPTURE INFO, REVIEW INFO. If any undiagnosed DTC(s) are displayed, go to applicable DTC test.
scientia non olet · About LEMON Manuals