LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1995 >> Lumina Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Adjustments >> Toe-In Adjustment (Rear)

Toe-In Adjustment (Rear)

  1. Adjust left and right sides separately. Lubricate threads of Turnbuckle Adjuster (J-38118). Install turnbuckle adjuster between hole in rear suspension rod and hole in jackstand pad. See Fig 1 . Ensure equal number of threads are exposed on both sides of turnbuckle. Hand-tighten turnbuckle adjuster.
  2. Loosen nut on bolt securing rear suspension rod to crossmember at least 4 turns. Rotate turnbuckle adjuster as necessary until rear toe-in is as specified. See ALIGNMENT SPECIFICATIONS  table. Tighten rear suspension rod nut at crossmember to specification. See TORQUE SPECIFICATIONS  .
Fig 1: Adjusting Rear Toe-In
G95C14631Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals