LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1995 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System & Traction Control >> Diagnosis >> Central Control Module Diagnostics >> CCM Method

CCM Method

  1. After all diagnosis and repairs are completed, turn ignition off. Using a jumper wire, connect DLC connector terminal No. 12 (CCM diagnostic enable) to No. 4 (ground). See Figure . Turn ignition on. Press TRIP RESET button on Driver Information Center (DIC) until "9.0" is displayed on trip monitor area of instrument cluster. Press TRIP ODO twice to change display to "9.7".
  2. Press and hold ENG/MET button on DIC until "- - -" is displayed in speedometer area of instrument cluster (this clears ABS/TCS DTCs). Turn ignition off. Turn ignition on. Enter diagnostics and verify no DTCs are present for ABS/TCS. Turn ignition off. Remove jumper wire from DLC connector.
scientia non olet · About LEMON Manuals