Both Mirrors Do Not Operate
- Disconnect mirror control switch connector. Turn ignition on. Connect test light between terminal "C" of mirror control switch connector and ground. See MIRROR CONTROL SWITCH CONNECTOR TERMINALS table.
- If test light does not come on, check for open or short to ground in Pink wire or for open PWR MIRROR fuse. Repair or replace as necessary. If test light comes on, connect test light between terminal "B" and terminal "C" of mirror control switch connector.
- If test light does not come on, check for open in Black wire. Repair or replace as necessary. If test light comes on, use ohmmeter to check for continuity between terminal "D" of mirror control switch connector and terminal "C" of left outside mirror connector. See OUTSIDE MIRROR CONNECTOR TERMINALS table.
- If continuity does not exist, check for open in Purple/White wire. Repair or replace as necessary. If continuity exists, replace mirror control switch.
MIRROR CONTROL SWITCH CONNECTOR TERMINALS
| Terminal | Wire Color |
|---|---|
| "A" | GRY/BLK |
| "B" | BLK |
| "C" | PNK |
| "D" | PPL/WHT |
| "E" | LT BLU |
| "F" | LT GRN |
| "G" | RED/WHT |
| "H" | WHT |
OUTSIDE MIRROR CONNECTOR TERMINALS
| Terminal | Left Mirror Wire Color | Right Mirror Wire Color |
|---|---|---|
| "A" | WHT | RED/WHT |
| "B" | LT GRN | LT BLU |
| "C" | PPL/WHT | PPL/WHT |