LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1995 >> Blazer 4D Utility, AWD >> Repair and Diagnosis >> Body & Frame >> Seats - Power >> Testing >> Power Seat Does Not Tilt Forward

Power Seat Does Not Tilt Forward

  1. Disconnect power seat front height motor connector. Connect test light at harness side of connector between terminals "A" (Dark Blue wire) and "B" (Dark Green wire). Operate front light switch. If test light does not light, go to next step. If test light lights, check and repair any wiring damage. If wiring is okay, replace motor.
  2. Disconnect power seat switch connector. Measure resistance between switch connector terminals "A" (Yellow wire) and "H" (Dark Blue wire). If continuity is present, go to next step. If continuity is not present, repair open circuit in Dark Blue wire.
  3. Measure resistance between power seat switch connector terminals "B" (Light Blue wire) and "G" (Dark Green wire). If continuity is present, replace power seat switch. If continuity is not present, repair open circuit in Dark Green wire.
scientia non olet · About LEMON Manuals