Automatic Transaxle Overhaul & Testing - 4T60-E

• Application
• Identification
• Description
• Lubrication
• Adjustments
• On-Vehicle Service
  • Notes
  • Valve Body
  • Drive Axle Shafts
  • Oil Cooler Flushing
• Trouble Shooting
  • Notes
  • Quick Check
  • Symptom Diagnosis
    • Notes
    • Oil Out Of Vent Or Foaming
    • High Or Low Line Pressure
    • Delayed Engagement
    • No Drive In "D"
    • Slips In "D"
    • No 1-2 Shift (1st Gear)
    • Harsh Or Soft 1-2 Shift
    • 1-2 Shift Shudder
    • No 2-3 Shift (1st & 2nd Gears)
    • 1-4 Shift (Misses 2nd & 3rd Gears)
    • 2-3 Shift Only
    • 1-2-4 Shift (No 2-3 Shift)
    • Harsh Or Soft 2-3 Shift
    • Early Or Late 2-3 Shift
    • 3-4 Shift (Misses 1st & 2nd Gears)
    • No 3-4 Shift
    • Harsh Or Soft 3-4 Shift
    • Early Or Late 3-4 Shift
    • No Reverse
    • Locked In Reverse
    • Slips In Reverse
    • Vehicle Moves In Park
    • Harsh Neutral-To-Drive Engagement
    • Vehicle Starts In 2nd Gear
    • Harsh Reverse
    • No Engine Braking In Manual 2nd Or Low
    • Harsh 4-3 Downshift
    • Harsh 3-2 Downshift
    • Harsh 2-1 Downshift
    • No Converter Clutch Apply
    • Converter Clutch Does Not Release
    • Converter Clutch Stuck On In 3rd & 4th
    • Converter Applied With Maximum Pressure (With PWM)
    • Converter Clutch Apply Rough, Slips Or Shudders
    • No TCC
  • Clutch & Band Applications
• Electronic Self-Diagnostics & Electronic Testing
• Testing
  • Road Test
    • Notes
    • Gear Selector Position "D" (Overdrive)
    • Gear Selector Position "3" (3rd Gear)
    • Gear Selector Position "2" (2nd Gear)
    • Gear Selector Position "1" (1st Gear)
  • Hydraulic Pressure Tests
    • Notes
    • Minimum Line Pressure Check
    • Full Line Pressure Check
  • Torque Converter
    • Inspection
    • End Play Check
• Removal & Installation
• Transaxle Disassembly
  • Notes
  • Rear Section
  • Lower Section
  • Servo Assemblies
  • Oil Pump & Valve Body
  • Channel Plate Assembly & 4TH Clutch
  • Final Drive Assembly
  • Drive Link Assembly
  • Input & 2ND Clutch Assemblies
  • Input Sprag, Sun Gears & 3RD Roller Clutch Assemblies
• Component Disassembly & Reassembly
  • Transaxle Case
    • Cleaning & Inspection
    • Drive Sprocket Support
    • Manual Shaft, Detent Lever & Actuator Rod
  • Final Drive Assembly
    • Disassembly & Inspection
    • Reassembly
  • Sun Gear Shaft
    • Inspection & Reassembly
  • 1-2 & Forward Bands
    • Inspection
  • Reaction Carrier & Drum
    • Cleaning & Inspection
    • Reassembly
  • Input Carrier Assembly
    • Inspection
    • Reassembly
  • Reverse Reaction Drum & Reverse Band
    • Inspection & Reassembly
  • 3RD Sprag, Input Sprag & Input Sun Gear
    • Disassembly
    • Inspection
    • Reassembly
  • Input Clutch & 3RD Clutch Assembly
    • Notes
    • Disassembly
    • Inspection
    • Input Shaft Seal Replacement
    • Retainer & Ball Assembly Replacement
    • Piston Seal Replacement
    • Reassembly
    • Input Clutch Plate Update
  • 2ND Clutch Assembly
    • Disassembly
    • Cleaning & Inspection
    • Piston Seal Replacement
    • Retainer & Ball Assembly Replacement
    • Reassembly
  • Driven Sprocket Support
    • Disassembly
    • Cleaning & Inspection
  • Output Shaft
    • Inspection
  • Drive Link Assembly & Sprockets
    • Cleaning & Inspection
    • Drive Link Chain Design Update
  • Valve Body
    • Disassembly
    • Cleaning & Inspection
    • Reassembly
  • Oil Pump Assembly
    • Disassembly
    • Cleaning & Inspection
    • Reassembly
    • Thermo Element Replacement
  • Forward & Reverse Servos
    • Inspection
    • Reassembly
• Transaxle Reassembly
• Torque Specifications
• Transaxle Specifications
• Wiring Diagrams