LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1995 >> Beretta Base, 2.2 4, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal & Installation >> Abs Light Driver Module >> Removal

Abs Light Driver Module: Removal

  1. Turn ignition off. Disconnect negative battery cable. Remove glove box. Locate light driver module behind right side of instrument panel. SeeFig 1 . Connector is Light Green. Module is taped to instrument panel harness.
  2. Open connector and slide light driver circuit board out of connector. To install, reverse removal procedure.
Fig 1: Locating ABS Light Driver Module
G94D32741Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals