LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1994 >> Lumina Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Adjustments >> Camber Adjustment >> Front

Camber Adjustment: Front

  1. To adjust camber, loosen 3 strut cover attaching nuts. Remove strut cover. Lift front of vehicle enough to allow strut attaching studs to clear mounting holes. Cover top of strut to keep metal shavings from damaging strut. Using Template (J-36892) as a guide, file the 3 holes as necessary to allow for camber adjustment. See Figure .
    CAUTION: When lifting vehicle, DO NOT  lift by suspension components or overextend drive axles.
  2. Paint exposed surfaces with Red oxide primer. Paint area to match color of vehicle. Lower front of vehicle while aligning studs into holes. Install, but DO NOT  tighten, 3 strut cover attaching nuts. Set camber to specification. Tighten strut cover attaching nuts to 17 ft. lbs.(24 N.m).
scientia non olet · About LEMON Manuals