LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1994 >> Lumina Base >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Testing >> Upshift Indicator Test

Upshift Indicator Test

  1. Disconnect Powertrain Control Module (PCM) White connector "B". Turn ignition switch to RUN position. Using voltmeter, measure voltage between PCM White connector terminal "B" (Tan/Black wire) and ground.
  2. If battery voltage is present, see appropriate article in ENGINE PERFORMANCE for PCM diagnosis. If battery voltage is not present, check bulb and Tan/Black wire for open circuit or short to ground. If bulb and wire are okay, replace IPC.
scientia non olet · About LEMON Manuals