LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1994 >> Forward Control 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Air Bag Restraint System) >> Disposal Procedures >> Scrapped Vehicle

Scrapped Vehicle

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1994 GMC Vandura Special, 1994 GMC Vandura, 1994 GMC Rally Camper Special, 1994 GMC Rally, and 1994 Chevrolet Sportvan. However, it is still accessible from the selected car via links, so may be relevant.

Some vehicles which have to be scrapped may have undeployed SIR systems. Follow procedures when scrapping a vehicle with an undeployed module:

  1. Turn ignition switch to OFF position. Remove SIR fuse. Disconnect Yellow 2-pin connector at base of steering column. Cut harness side of SIR wiring approximately 3-6" from Yellow 2-pin connector.
  2. Splice 2 wires at least 20 feet long to wiring cut from SIR harness. Connect Yellow 2-pin connector.
  3. Ensure inflator module is secured to steering wheel. Remove all loose objects from front seat, and ensure no one is in vehicle. Stretch wires away from car as far as possible.
  4. Connect wires to a 12-volt battery. Air bag should deploy. DO NOT touch inflator module area for 20 minutes due to heat generated during deployment. Wear gloves and safety glasses before handling deployed air bag. Wash hands with mild soap and water afterward.
  5. On vehicles with passenger-side air bags, repeat deployment procedure for passenger side. Access Yellow 2-pin connector at base of right instrument panel behind knee bolster or behind glove box door assembly.