LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1994 >> Forward Control 7.4 N >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Bench Testing >> Solenoid Winding Tests >> Hold-In Windings

Hold-In Windings

  1. Connect an ammeter, voltmeter, carbon pile and battery into starter circuit. See Fig 1. Using carbon pile, decrease battery voltage to 10 volts.
  2. Refer to SOLENOID HOLD-IN WINDING SPECIFICATIONS  table for correct amperage reading. A higher reading indicates windings are shorted or grounded; a lower reading indicates excessive resistance.
Fig 1: Testing Solenoid Hold-In Windings
G90C04787Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals