LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1994 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Transmission >> Clutches >> Removal & Installation >> Clutch Assembly >> Installation

Clutch Assembly: Installation

  1. If flywheel was removed, install with crankshaft dowel pin at 11 o'clock position. Apply Loctite No. 262 to bolt threads. Tighten bolts to specification. See TORQUE SPECIFICATIONS  table at the end of this article.
  2. Position clutch disc with damper springs toward transmission (side marked FLYWHEEL SIDE toward flywheel). Use Clutch Arbor(J-38836) to support and center clutch disc.
  3. Position pressure plate and cover assembly onto flywheel. Using a crisscross sequence, tighten pressure plate bolts gradually and evenly to prevent distortion. To install remaining components, reverse removal procedure. When installing clutch housing, ensure clutch release fork engages release bearing.
scientia non olet · About LEMON Manuals