Only Some Doors Lock & Unlock
- Disconnect suspect door lock motor connector. Hold left front door lock switch in unlock position and measure voltage between suspect door lock motor connector terminal "A" (rear door-Tan wire) or terminal "B" (front door-Tan wire) and ground. If battery voltage is not present, repair open circuit in Tan wire.
- If battery voltage is present, hold left front door lock switch in unlock position and measure voltage between suspect door lock motor connector terminals "A" (Tan wire) and "B" (Gray wire).
- If battery voltage is not present, repair open circuit in Gray wire. If battery voltage is present, replace suspect door lock motor.