Toe-In Adjustment (Front)
WARNING: This page is about a different car, the 1994 Pontiac Grand Am, 1994 Oldsmobile Achieva, and 1994 Buick Skylark. However, it is still accessible from the selected car via links, so may be relevant.
Loosen tie rod end lock nut. See Fig 1 . Loosen steering gear dust boot clamp(s) at tie rod end. Turn inner tie rod to obtain correct toe-in. Tighten lock nut to specification. See TORQUE SPECIFICATIONS . Ensure steering gear dust boot is straight after adjustment. Tighten dust boot clamp.