LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1994 >> Cavalier Base, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Anti-Lock Brake System - Abs-VI) >> Removal & Installation >> Abs Light Driver Module >> Removal

Abs Light Driver Module: Removal

WARNING: This page is about a different car, the 1994 Pontiac Grand Am, 1994 Oldsmobile Achieva, and 1994 Buick Skylark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off. Disconnect negative battery cable. On Achieva and Skylark, remove left instrument panel trim plate. Light driver is located to left of radio control, taped to harness. Connector is Light Green. Open connector and slide light driver circuit board out of connector. See Figure .
  2. On Grand Am, remove left instrument panel trim plate. Light driver is taped to instrument panel harness. Connector is Light Green. Open connector and slide light driver circuit board out of connector. See Figure .