LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1992 >> Hi-Cube 5.7 K >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Vent/Window Run Channel Assembly >> Removal

Vent/Window Run Channel Assembly: Removal

  1. Lower the window.
  2. Remove the trim panel. See TRIM PANEL  .
  3. Remove run channel molding (224). See Figure . Pull the molding out of the vent assembly only.
  4. Remove the door panel to run channel bolt (228). See Figure .
  5. Remove the door to ventilator screws. See Figure .
  6. Remove door vent/window run channel assembly (229) to the vehicle. See Figure . Pull the top of the vent away from the door frame. Lift and rotate the assembly out of the door.
scientia non olet · About LEMON Manuals