LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1992 >> Forward Control 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Engine Controls - Tests W/Codes - Body Control Computer) >> Vehicle Communication Tests >> Test VER-1 - Verification Procedure

Test VER-1 - Verification Procedure

WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, 1995 Dodge Caravan, and 1995 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure ignition is off and scan tool is connected. Reconnect all previously disconnected components and connectors. Turn ignition on. If scan tool screen is blank, go to TEST 2A. If scan tool screen is not blank, go to next step.
  2. If there is a BUS failure message on scan tool, go to TEST 1A. If there is no BUS failure message on scan tool, select module in question. If scan tool shows NO RESPONSE, return to appropriate diagnostic article and perform indicated test.
  3. If scan tool does not show NO RESPONSE, inspect vehicle for original complaint. If original complaint is present, return to appropriate diagnostic article and perform indicated test. If original complaint is not present, repair is complete.
scientia non olet · About LEMON Manuals