Pretest Inspection
WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, 1995 Dodge Caravan, and 1995 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
Before proceeding with diagnosis, the following precautions must be followed:
- Vehicle must have a fully charged battery and functional charging system.
- Always start at TEST 1A. Starting with any other test may result in incorrect results.
- Only perform test steps indicated. It is NOT necessary to perform all steps in a test.
- BODY CONTROL COMPUTER - VEHICLE COMMUNICATIONS tests should only be used when instructed to do so by another test. Always start at TEST 1A.
- Always perform VERIFICATION TEST after repairs are completed.
- Turn ignition switch to OFF position before disconnecting or connecting module connector.
- At end of each test step, reconnect all wires and install any components removed for testing.
- Use extreme care when connecting or disconnecting wiring during testing to prevent accidental grounding or shorting.
- DO NOT use a test light in place of a voltmeter.
- Always disconnect scan tool after use.
- Always disconnect scan tool before charging battery.