Cruise Control Cable

Removal

1) Remove lower left sound insulator from instrument panel. Disconnect accelerator cable from accelerator pedal. Remove accelerator pedal. Remove adjuster splash cover retaining screw.

2) Remove adjuster splash cover and foam insert. Remove accelerator and cruise control cables from adjuster. Remove accelerator cable from firewall by depressing each tang with a flat-blade screwdriver tip.

3) Remove cruiser control cable from cruise control servo. Remove cruise control cable from servo bracket.

Installation

To install, reverse removal procedure. Tighten adjuster splash cover retaining screws to 44 INCH lbs. (5 N.m). Adjust cruise control cable (if necessary).