LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1992 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Central Control Module >> Programming >> Resetting "Change Oil" Indicator

Resetting "Change Oil" Indicator

  1. Turn ignition ON with engine off. Ensure DLC terminal G is not grounded.
  2. Press ENG/MET button and release, then within 5 seconds press ENG/MET button again.
  3. Within 5 seconds of pressing ENG/MET button for second time, press and hold RANGE button. Change Oil indicator should begin to flash.
  4. Hold RANGE button until indicator stops flashing. Indicator is now reset. Turn ignition OFF and repeat procedure if indicator fails to reset.
scientia non olet · About LEMON Manuals