Brake Light Switch
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 1991 Pontiac Grand Prix, 1991 Oldsmobile Cutlass Supreme, 1991 Buick Regal, 1990 Pontiac Grand Prix, and 1990 Oldsmobile Cutlass Supreme. However, it is still accessible from the selected car via links, so may be relevant.
- Remove left sound insulator panel. Depress and hold brake pedal. Using a stiff wire with a hooked end, gently pull switch set lever forward (toward front of vehicle) and listen for an audible click. Click indicates release of automatic adjuster. If no click is heard, release brake pedal and repeat step procedure.
- After automatic adjuster has been released, pull brake pedal rearward. Listen for switch to ratchet into set position. A minimum of 3 clicks of the ratchet should be heard.