LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1992 >> Beretta Base, 2.2 4, Standard >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Lock Module >> Removal

Lock Module: Removal

  1. Remove door trim panel. See DOOR TRIM PANEL  .
  2. Remove water deflector. See WATER DEFLECTOR  .
  3. Remove rivet securing handle to door inner panel by first center punching a depression in head of rivet, then drilling out rivet using a 3/16" drill bit.
  4. Remove inside remote handle by sliding rearward to disengage tabs on handle from slots in the module assembly.
scientia non olet · About LEMON Manuals