Service (In Vehicle)

The following components can be removed from transmission without removing transmission from vehicle. For removal and installation procedures for these components, see TRANSMISSION DISASSEMBLY  .

• Extension Housing Seal.
• Governor Assembly.
• Intermediate Servo Piston Assembly.
• Oil Pan and Screen.
• Control Valve Assembly.
• Check Balls and Valve Body Spacer Plate and Gaskets.
• Pressure Regulator Parts.
• Inside Detent/Selector Lever.
• Manual Detent Roller and Spring Assembly.
• Throttle Lever and Bracket Assembly.
• T.V. Cable and "O" Ring.
• T.V. Boost Valve and Bushing.
• Parking Pawl Actuator Rod, Bracket and Pawl.
• Manual Shaft and Seal.
• Manual Valve and Link.
• Rear Seal.
• 1-2 Accumulator Assembly.
• 3-4 Accumulator Assembly.
• Low-Reverse Cup Plug.
• Reverse Boost Valve and Bushing.
• Stop Valve.
• Intermediate Band Anchor Pin.
• 4-3 Pressure Switch.
• 4th Clutch Pressure Switch.
• Speedometer Driven Gear Assembly.
• Converter Clutch Valve and Spring.
• Converter Clutch Solenoid.
• Solenoid Wire Clips.
• Electrical Connectors.
• Cooler Fittings.
• Oil Filter Pipe and "O" Ring.