LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1989 >> Beretta GT, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Alignment Procedures >> Caster (Rear)

Caster (Rear)

  1. Remove rear auxiliary spring and strut assembly. See appropriate article in the SUSPENSION section.
  2. File a lateral hole (oblong) on: lower strut-to-knuckle attaching hole, lower strut attaching hole, and lower stabilizer bracket-to-strut attaching hole.
  3. Install strut assembly and adjust camber to proper specifications. Tighten strut-to-knuckle nuts to 136 ft. lbs. (184 N.m).
Fig 1: Caster Adjustment (Rear)
G28173
scientia non olet · About LEMON Manuals