LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1988 >> Sprint Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - Electronic (Non Turbo) >> Testing >> Ignition Module Test >> Non-Turbo

Ignition Module Test: Non-Turbo

  1. Remove distributor cap and dust cover. Disconnect Red and White wires from ignition module. Connect ohmmeter, test light, and 12-volt battery to ignition module. See Fig 1.
  2. Connect ohmmeter negative lead to Red wire terminal and positive lead to White wire terminal. Test light should glow, indicating that module is okay. If not, replace ignition module.
Fig 1: Ignition Module Test
G62554Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals