Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Specification | ||||
|---|---|---|---|---|---|
| Adjustment Procedures | (1) | ||||
| Camber in Degrees (Fraction) | 1 13/32 to 13/32 | ||||
| Camber in Degrees (Decimal) | 1.4 to 0.4 | ||||
| Caster in Degrees (Fraction) | 2 13/64 to 3 13/64 | ||||
| Caster in Degrees (Decimal) | 2.2 to 3.2 | ||||
| Toe-In in Inches (Fraction) | 1/2 to 3/32 | ||||
| Toe-In in Inches (Decimal) | 0.5 to 0.1 | ||||
| Toe-In in Degrees (Fraction) | 3/32 to 13/64 | ||||
| Toe-In in Degrees (Decimal) | 0.1 to 0.2 | ||||
| Toe-Out on Turns | (2) | ||||
| Steering Axis Inclination (SAI) | (2) | ||||
|
|||||