LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1987 >> Chevette 2D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Wheel Alignment Specifications & Procedures) >> Adjustments >> Toe-In Adjustment (Rear)

Toe-In Adjustment (Rear)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1991 Cadillac Seville, 1990 Cadillac Seville, 1989 Cadillac Seville, 1988 Cadillac Seville, and 1987 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.

Loosen front and rear inside control arm mounting bolts. Pry between rear control arm mounting bolts and rear support assembly until proper toe-in is obtained. See Fig 1. Tighten control arm mounting bolts to specification. See TORQUE SPECIFICATIONS .

Fig 1: Adjusting Rear Toe-In
G110033Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals