LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1986 >> Camaro Base, 2.8 S, Standard >> Repair and Diagnosis >> Engine Performance >> Specifications >> Fuel Injection System Specifications - PFI >> Specifications

Fuel Injection System Specifications - PFI: Specifications

PORT FUEL INJECTION SPECIFICATIONS

Application Specification
1.8L Turbo (VIN J)
Throttle Body Part No. 10026724
Min. Air Rate (RPM) Not adjustable.
..... Minimum air rate is reset by ECM when
..... when vehicle is driven at about 35 MPH.
TPS Voltage Less than 1.25 volt with throttle
...... closed at idle or with ignition on.
2.8L (VIN S, W & 9)
Throttle Body Part No. 17085023, 17085024, 17085025
Min. Air Rate (RPM) M/T @ 600-700
TPS Voltage 0.50-0.60
Throttle Body Part No. 17085157, 17085167
Min. Air Rate (RPM) A/T @ 500-600
..... Auto. Trans. in Drive.
TPS Voltage N/A
3.0L (VIN L)
Throttle Body Part No. 17086041
Min. Air Rate (RPM) 450-550
..... Auto. Trans. in Drive.
TPS Voltage 0.50-0.60
3.8L (VIN B & 3)
Throttle Body Part No. 25524565
Min. Air Rate (RPM) 450-550
..... Auto. Trans. in Drive.
TPS Voltage 0.35-0.44
..... Maximum voltage value of 0.44 volt.
3.8L Turbo (VIN 7)
Throttle Body Part No. 25525359
Min. Air Rate (RPM) 450-550
..... Auto. Trans. in Drive.
TPS Voltage 0.35-0.44
..... Maximum voltage value of 0.44 volt.
5.0L (VIN F)
Throttle Body Part No. 17086051
Min. Air Rate (RPM) 400
..... Auto. Trans. in Drive.
TPS Voltage 0.465-0.615
5.7L (VIN 8)
Throttle Body Part No. 17086049, 17086051
Min. Air Rate (RPM) 400
..... In Drive. On Man. Trans. set to 450 RPM.
TPS Voltage 0.465-0.615