EXPERTEC TSB (57-4)
Publication date: 1985-06-13Reference number: 57-4
EXPERTEC TSB
TECHNICAL SERVICE BULLETIN
Reference Number(s): 57-4, Date of Issue:
August 26, 1985
REVISED MAF BURNOFF MODULE REMOVAL PROCEDURE
Model(s): 1985 Chevrolet Corvette
Bulletin No.: 57-4
Date: August 26, 1985
SERVICE INFORMATION
The following is a revised removal procedure for the 1985 Corvette MAF burn-off module. Please note this change in your copy of the 1985 Corvette Shop Manual (ST-364-85) on page 6E3-77.
- Remove Fuse Cover And Trim Panel.
- Remove I.P. Bezel.
- Remove Upper Trim Pad.
- Remove RH I.P. Brace To I.P. Bolt.
- Remove Center Trim Pad To Carrier Screws.
- Remove Air Duct.
- Remove RH I.P. Insulator (Hush Panel) And Disconnect Module Wires.
- Remove Burn-Off Module.
- Reverse Removal Procedures.