LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1985 >> Camaro Base, 2.8 S, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - PFI >> Removal & Installation >> Throttle Position Sensor >> Installation

Throttle Position Sensor: Installation

  1. With throttle valve in closed idle position, install TPS on throttle body assembly. TPS pick-up lever must be above tang on throttle actuator lever. Install new screws with thread locking compound.
  2. On 1.8L, tighten screws and install connector. On 3.8L, TPS must be adjusted before tightening screws. See appropriate article in TUNE-UP section.