Intermediate Servo: Inspection
- Check intermediate servo pin for wear, damage and proper fit in case bore. Inspect inner and outer seal rings for damage and proper fit in seal ring grooves of piston.
CAUTION:
DO NOT
remove seal rings from piston unless replacement is required.
- Check servo piston and cover for cracks or other damage. Inspect servo spring for collapsed coils or distortion. Check intermediate servo cover and piston assembly for proper combination and usage. See INTERMEDIATE SERVO COVER & PISTON USAGE
.
INTERMEDIATE SERVO COVER & PISTON USAGE
| Model Application |
Cover I.D. No. |
Piston Casting No. |
Piston I.D. |
| All Models |
8635692 |
8633563 |
3 Steps |