LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1984 >> Impala 3.8 A >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - V6 & V8 Diesel >> Testing >> Fuel Pump >> Fuel Pump Pressure Test

Fuel Pump Pressure Test

  1. Disconnect fuel line between fuel pump and fuel filter inlet on the engine. Install fuel pressure gauge on fuel line.
  2. On V8 engine, start engine and run at slow idle using fuel in injection pump. Pressure should be 5.5-6.5 psi (.39-.46 kg/cm2 ). Replace fuel pump if pressure is too high, too low, or varies materially at different engine speeds.