Alignment Specifications

WARNING: This page is about a different car, the 1983 Pontiac Phoenix, 1983 Oldsmobile Omega, 1983 Chevrolet Citation, and 1983 Buick Skylark. However, it is still accessible from the selected car via links, so may be relevant.

WHEEL ALIGNMENT SPECIFICATIONS (SKYLARK)

Application		Specification
Caster (Degrees)		2.0 +/- 1.0
Camber (Degrees)		0 +/- 1/2
Toe-in (Inches)		0 +/- 1/8
Toe-Out on Turns (Degrees)
Inner		N/A
Outer		N/A

WHEEL ALIGNMENT SPECIFICATIONS (CITATION)

Application		Specification
Caster (Degrees)		2 +/- 1
Camber (Degrees)		0 +/- 1/2
Toe-in (Inches)		0 +/- 3/32
Toe-Out on Turns (Degrees)
Inner		N/A
Outer		N/A

WHEEL ALIGNMENT SPECIFICATIONS (OMEGA)

Application		Specification
Caster (Degrees)		1 +/- 3
Camber (Degrees)		0 +/- 1/2
Toe-in (Inches)		0 +/- 3/32
Toe-Out on Turns (Degrees)
Inner		N/A
Outer		N/A

WHEEL ALIGNMENT SPECIFICATIONS (PHOENIX)

Application

Specification

Caster (Degrees)

⁽¹⁾

Camber (Degrees)

0 +/- 1/2

Toe-in (Inches)

⁽²⁾ 0 +/- 1/8

Toe-Out on Turns (Degrees)

Inner

N/A

Outer

N/A

⁽¹⁾	Non-adjustable.

⁽²⁾	Maximum side-to-side difference 1/2°.