LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1980 >> Luv RWD, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Catalytic Converter And Over-Temperature Control System >> Testing >> Accelerator Switch And Clutch Switch

Accelerator Switch And Clutch Switch

  1. Adjust accelerator switch so clearance between switch and pedal is 0.04 - 0.05" (1 - 1.3 mm). Adjust clutch pedal switch so clutch pedal is level with brake pedal.
  2. Detach wiring from accelerator switch and attach suitable continuity tester. Operate pedal, noting that continuity exists when pedal is released and no continuity is present when pedal is depressed. Repeat test with clutch switch. Replace if malfunctioning.
scientia non olet · About LEMON Manuals