Riding Height

Place vehicle on smooth level surface. Bounce vehicle several times. Raise vehicle and allow to settle at normal height. Measure distance as shown in Fig 1 and 2.

Fig 1: Rear Suspension Riding Height Measuring Point
Courtesy of GENERAL MOTORS COMPANY

Fig 2: Front Suspension Riding Height Measuring Point
Courtesy of GENERAL MOTORS COMPANY

NOTE: Height check should be made with a full tank of gas, spare tire installed, and jack included. No passengers should be in vehicle.

Difference between measurements of each side must not be more than 1/2" (12.7 mm). If an adjustment is necessary, it can be made at bolt on height control arm.

RIDING HEIGHT SPECIFICATIONS

Application		Front In. (mm)	Rear In. (mm)
2-WD
	Standard	4.6(116.8)	6.1 (155)
	Long Wheelbase	4.6(116.8)	7.5(190)
4-WD		4.8(122)	7.7(195)